Which Product is Right for me
Problem 1. Loss of Central Heating Efficiency.
Cause 1. Limescale or Scale builds up on the boiler heat exchanger.
- Solution 1). X-PO10 Inhibitor.
Problem 2. Domestic Central Heating system Boiler is running longer.
Cause 2. Limescale or Scale builds up on the boiler heat exchanger. Black oxide sludge, flux, oils and installation debris is slowing the flow of water through the radiators.
- Solution 2. X-PO40 Premier De-Sludging Agent & PO10 Inhibitor.
Problem 3. Pump Failure.
Cause 3. Limescale or Scale builds up on the surface of the pump blades.
- Solution 3. X-PO20 Premier De-Scaling Agent & X-PO10 Inhibitor.
Problem 4. Pump Failure.
Cause 4. This can be caused by Limescale or Scale formation, black oxide sludge, flux, oils and installation debris blocking the pump or radiators.
- Solution 4. X-PO40 Premier De-Sludging Agent & X-PO10 Inhibitor.
Problem 5. Boiler Heat Exchanger Noises.
Cause 5. Limescale or Scale builds up on the Boiler Heat Exchanger.
- Solution 5. X-PO20 Inhibitor.
Problem 6. Central Heating Noises.
Cause 6. This can be caused by Limescale or Scale formation, black oxide sludge, flux, oils and installation debris blocking the pump or radiators.
- Solution 6. X-PO40 Premier De-Sludging Agent & X-PO10 Inhibitor.
Problem 7. Cold Radiators.
Cause 7. This can be caused by small amounts of Limescale or Scale formation, black oxide sludge, flux, oils and installation debris blocking the radiators.
- Solution 7). X-PO10 Inhibitor.
Problem 8. Cold Radiators.
Cause 8. This can be caused by large amounts of Limescale or Scale formation, black oxide sludge, flux, oils and installation debris blocking the radiators.
- Solution 8. X-PO40 Premier De-Sludging Agent & X-PO10 Inhibitor.
Problem 9. Central Heating Radiator Leak.
Cause 9. This is caused by the lack of a good water treatment product causing the inside of the system to corrode from the inside out.
- Solution 9. X-PO10 Inhibitor.
Problem 10. Aluminium Corrosion.
Cause 10. This is caused by the lack of a good water treatment product keeping the pH level in the water at a neutral state.
- Solution 10. X-PO10 Inhibitor.
Problem 11. Central Heating Air.
Cause 11. This is caused by the lack of a good water treatment product causing the inside of the system to corrode from the inside out with a by-product of gassing in the system.
- Solution 11. X-PO10 Inhibitor.